Special stainless steel cleaners
A question of chemistry
Our special cleaners from our own production consist exclusively of food- approved ingredients. They are free from toxic hydrofluoric and nitric acid and do not produce any harmful gases during use, as is the case with commercially available pickling cleaners. Reuter products clean gently and non-toxic.
We also attach great importance to optimised handling! That‘s why we offer our speciality cleaners as disposable wipes in practical wipe dispensers.
Before and after cleaning:
Pre&Post Clean
The light, non-flammable cleaning agent removes dust, fingerprints and light oil soiling from stainless steel surfaces or glass quickly, safely and streak-free. It is suitable for degreasing BEFORE welding; we recommend using it AFTER every cleaning measure: Pre&Post Cleaner neutralises the surface and thus prevents the formation of white stains.
Application: Pre&Post Clean is sprayed onto the surfaces and then wiped off with a soft cloth or paper. Our pre-soaked wipes from the wipe dispenser are particularly practical.
Scrub away a lot of dirt:
Abrasive Wipes
Quickly pluck a wipe and remove stubborn dirt such as encrustations caused by chlorides, limescale or rust – you should always have this practical wipe dispenser close to hand.
Application: Simply use the abrasive wipes for wiping – done! No after- treatment necessary.
Brings a fine shine:
Stainless Care Spray
The practical stainless steel care spray is particularly suitable for the daily basic care of matt and polished surfaces indoors and outdoors. We also recommend using it AFTER more intensive cleaning. The light cleaning effect of the spray does not attack the fresh passivation, produces a uniform light shine, has an antistatic effect and protects against fingerprints.
Application: Spray a thin layer of Stainless Care onto the dry surface and rub in with a cotton cloth.
Works really well:
SFC – Stainless Finishing Cleaner
The special cleaner removes rust, light oxide deposits and ferrite contamination as well as limescale and water stains with a light chemical abrasion. It also renews and strengthens the passive layer on stainless steel.
Application: Simply wipe the surfaces with the pre-soaked SFC wipes from the practical wipe dispenser or leave the wipes on for a longer exposure time (5-15 minutes). You can further increase the cleaning effect by using our fleece pads or the cleaning sponge.
Neutralisation with Pre&Post wipes is essential. We recommend Stainless Care as additional finishing. Personal protective equipment required.
This rubs properly:
Abrasive Cleaner
Ultra-fine nano-abrasive particles mechanically remove material from the surface; the slightly acidic chemistry of this special cleaner further enhances this effect. It quickly and efficiently removes white stains, incrustations caused by chlorides, limescale and surface rust and at the same time strengthens the passive layer.
Application: Apply Abrasive Cleaner with orange cleaning pads, sponge or white fleece, leave to dry for 5-15 minutes and rub off again. For large areas, it can also be applied mechanically with our fleece pad and random orbital sander. Then neutralise with Pre&Post Clean and rinse with water. Personal protective equipment required.